Juniper EX9200 Features Manual page 92

Traffic Policers Feature Guide for EX9200 Switches
Related
Documentation
Related
Documentation
74
Policers:
Name
p-ftp-10p-500k-discard-t-ftp-fe-0/1/1.1-i
p-icmp-500k-500k-discard-t-icmp-fe-0/1/1.1-i
The command output displays the names of the policers (
p-icmp-500k-500k-discard
t-icmp , respectively) under which the policer action is specified. The policer-specific
output lines display the number of packets that matched the filter term. This is only the
number of out-of-specification (out-of-spec) packet counts, not all packets policed by
the policer.
Order of Policer and Firewall Filter Operations on page 11
Two-Color Policer Configuration Overview on page 49
Single-Rate Two-Color Policer Overview on page 55
Example: Limiting Inbound Traffic at Your Network Border by Configuring an Ingress
Single-Rate Two-Color Policer on page 56
Order of Policer and Firewall Filter Operations on page 11
Two-Color Policer Configuration Overview on page 49
Guidelines for Applying Traffic Policers on page 15
Determining Proper Burst Size for Traffic Policers on page 30
), combined with the names of the filter terms (
Bytes Packets
0
0
p-ftp-10p-500k-discard
and
t-ftp
Copyright © 2016, Juniper Networks, Inc.
0
0
and