Understanding The Frame Length For Policing Packets; Figure 2: Incoming And Outgoing Policers And Firewall Filters; Table 4: Packet Lengths Considered For Traffic Policers - Juniper EX9200 Features Manual

Traffic Policers Feature Guide for EX9200 Switches
Related
Documentation

Understanding the Frame Length for Policing Packets

Table 4: Packet Lengths Considered for Traffic Policers

Protocol Policing Packet Lengths
Any L3 frame including header
IPv4 L3 frame including header
IPv6 L3 frame including header
MPLS L3 frame including header
VPLS L2 frame including header + FCS
Bridge L2 frame including header + FCS
CCC L2 frame including header + FCS
Related
Documentation
12

Figure 2: Incoming and Outgoing Policers and Firewall Filters

Two-Color Policer Configuration Overview on page 49
Three-Color Policer Configuration Overview on page 145
Hierarchical Policer Configuration Overview
Table 4 on page 12 describes the packet lengths that are considered when you use a
traffic policer.
Policer Overhead to Account for Rate Shaping in the Traffic Manager on page 135
Copyright © 2016, Juniper Networks, Inc.