3 Connecting the Speed Touch Home
3.3
ATMF 25 Interface
5
Power
Figure 10
Rear View for connecting the Speed Touch Home
3.4
ATMF 25 & Ethernet Interface
26 / 180
4
2
1
DC
ATMF 25
10Base T/MDI-X
The (optional) ATMF port
ATM Forum 25.6 Mbit/s compliant interface of type ATM Network
Equipment.
Connect the PC (with an ATMF PC NIC card of type ATM End
"
Equipment) directly to the ATMF interface
cable.
To connect multiple PCs to the ATMF interface, an ATM switch
"
is required.
Use a crossover cable between ATMF interface
ATM switch, since both are of type Network Equipment".
The STHome version equipped with an Ethernet and ATMF 25
interface is designed for the concurrent use of both interfaces.
Therefore, the configurations described in sections 3.2 and 3.3
remain equally valid when used simultaneously. There is no
performance penalty on this simultaneous use except for the
sharing of the upstream and downstream ADSL bandwidth.
Defaults
2
on the Speed Touch Home is an
3EC 17096 AAAA TCZZA Ed. 01
3
Line
adsl 0782/ 01
2 via the LAN
2
and the