The Bridging Page - Alcatel speed touch home Advanced User's Manual

12 Speed Touch Home Local Configuration
12.1.8

The Bridging Page

Bridge Configuration
Page
122 / 180
The Speed Touch Home contains an IEEE 802.1D compliant
Transparent Bridge that can be reconfigured via this local web
page.
In principle for Bridging nothing needs to be configured for
proper operation as it is a Plug & Play device.
However, should interoperability problems occur, you can easily
change the default settings according to the information supplied
by the remote organization (ISP or corporate network).
Figure 68 'Bridge Configurations' Web Page
Two tables are found on this page (See figure 68). the first is the
'Bridging Ports' table. It contains the following information:
Bridge Port
"
One of the characteristics of a data bridge is the number of
supported Bridge ports. A Bridge port is in fact the logical
equivalent of an interface. By default the STHome supports
one local port (Ethernet interface) and four remote ports.
Only the remote ports are shown in the table.
3EC 17096 AAAA TCZZA Ed. 01