Figure 58 'Arp -A' Command - Alcatel speed touch home Advanced User's Manual

11 Lost Speed Touch
102 / 180
4. You can verify if this step was successful by executing the
arp –a
command a second time (See figure 58).
Figure 58 'Arp -a' Command
5. Turn off the Speed Touch Home.
6. Turn on again and wait for 30 seconds to allow the selftest to
end.
7. Ping the IP address you just entered in the ARP cache within
60 seconds (see figure 59):
ping <STHome IP address>
For this example the command is:
ping 10.0.0.145
Figure 59 Ping 10.0.0.145
3EC 17096 AAAA TCZZA Ed. 01