Ethernet And Atmf 25; System Requirements; Figure 5 Rear Panel With Ethernet Interface (A), Or Both Atmf 25 And Ethernet (B) - Alcatel Speed Touch Home User Manual

2.2.4

Ethernet and ATMF 25

2.3

System Requirements

ADSL
Ethernet
ATMF 25
Operating System
Local Configuration
3EC 17058 AAAA TCZZA Ed. 03
The Speed Touch Home is available in two versions: Ethernet only
and Ethernet + ATMF 25 (See figures 5 (a) and (b)).
Ethernet will be your natural choice for networking. The ATMForum
25.6 interface provides excellent protocol transparency and Native
Asynchronic Transfer Mode (ATM) application support.
Power Switch
Power
Socket
(a)
Figure 5 Rear panel with Ethernet Interface (a), or both
ATMF 25 and Ethernet (b)
ADSL service must be enabled on your telephone (POTS, or ISDN)
line.
A Personal Computer (PC)/workstation with an Ethernet
"
10Base T PC Network Interface Card (NIC)
For local networking, a 10Base T hub and the necessary
"
connection cables.
A PC/workstation with an ATMF 25 PC NIC
"
For advanced networking, an ATM switch supporting ATMF 25.
"
If the STHome is used in Bridging mode, it does not put any
"
requirements on the Operating System (OS).
When the STHome is used in PPPoA to PPTP Relaying mode,
"
the OS must support local tunneling based on PPP/PPTP .
In case the ATMF 25 interface is used, see the manual of your
"
ATMF 25 PC NIC for additional requirements.
Commend Line Interface (CLI): Telnet Application
"
HTTP/HTML: A Web browser.
"
Ethernet
Interface
(b)
adsl 0645/ 01
2 Speed Touch Tour
ATMF
Power Switch
Interface
Power
Ethernet
Socket
Interface
adsl 0644/ 01
15 / 86