Figure 37 'Configure Port Usage' Window - Alcatel speed touch home Advanced User's Manual

Note
3EC 17096 AAAA TCZZA Ed. 01
11. At this point, by default the ports are configured for dial in
only. To change this select a port and click
'Remote Access Setup' window.
12. The 'Configure Port Usage' window appears (See figure 37).
Figure 37 'Configure Port Usage' Window
Select the 'Dial out only' option and click
13. Steps 11. and 12. can be performed for each port
(if necessary), then proceed with step 14.
14. In addition you can also define which tunneled protocols you
will allow through the VPNs.
To do so highlight each port and click
In the 'Network Configuration' window enable or disable the
protocols you want and click
You can enable or disable IP , IPX or NETBEUI sessions for each
port.
15. Click
The RAS application will inform you it needs to be restarted in
order for the changes to take effect. Click
7 PPP to PPTP Relaying for Windows 9x
and finally
in the
.
.
.
.
to restart.
69 / 180