Multiple Pc Configuration; Figure 9 Sthome Multiple Pc Configuration - Alcatel speed touch home Advanced User's Manual

Note
3.2.2

Multiple PC Configuration

3EC 17096 AAAA TCZZA Ed. 01
Assuming the Speed Touch Home and PC are properly powered
on, the Link Integrity LEDs on both your PC and STHome should
be continuously green. This indicates that the link between the
STHome and PC is correct. If not, check the cable layout
according to Appendix B.
Your PC may have a build in Ethernet port. If not, you must firstly
install an Ethernet PC NIC.
The most convenient way to connect a Local Area Network (LAN)
with multiple users to your STHome is via an Ethernet hub.
Use a crossover LAN cable to connect the Ethernet interface
to an MDI X port of your hub.
Use straight through LAN cables to make the connections between
the MDI X hub ports and the PC's or workstation's MDI Ethernet
ports.
MDI X
MDI X
Ethernet
crossover cable
Figure 9 STHome Multiple PC Configuration
Assuming the STHome and hub are properly powered on, the
Link Integrity LEDs on both hub port and STHome, should be
continuously green. This indicates that the link between the
STHome and hub is correct. If not check the cable layout
according to Appendix B.
3 Connecting the Speed Touch Home
MDI
straight cable
MDI X MDI
straight cable
MDI
straight cable
MDI
straight cable
adsl 0531/ 03
1
25 / 180