Alcatel speed touch home Advanced User's Manual page 118

12 Speed Touch Home Local Configuration
Note
IP Route Table
Note
118 / 180
Type
"
Indicates the origin of the IP parameters and can take
following values:
Automatic
D
The parameters were acquired automatically through
DHCP . For more information see the 'Initial Setup' page.
Extra
D
Implies that an additional IP parameter set was added
through the 'Initial Setup' page.
Transl
"
This field has no meaning for the STHome and will always
show 'None'.
To add an IP address, an interface must be selected and the
address and Netmask in dotted decimal notation specified.
Deleting an IP address automatically removes all related routes in
the tables.
Although the Speed Touch Home has no real IP Routing
functionality, it has the flexibility to access machines in other
networks than its own. The IP Route table recalls these specific
routes (See figure 64).
Similar to the IP address table, a number of routes are
preconfigured.
In special circumstances, routes can be added manually to the
routing information base, using the bottom row of the table.
In order to add a route to the routing table the following specific
fields must be filled out:
Destination IP prefix
"
Source IP prefix
"
Gateway IP address
"
Intf
"
An IP prefix is the combination of an IP address and
(Sub)Netmask: e.g. 10.0.0.138/32. See section 9.1 for more.
The criteria for a route to be valid are:
The destination and source entries must contain correct
"
prefixes.
The gateway must have a direct connection.
"
3EC 17096 AAAA TCZZA Ed. 01