Power Supply; Figure 11 Rear View For Connecting The Speed Touch Home - Alcatel speed touch home Advanced User's Manual

3 Connecting the Speed Touch Home
3.6

Power Supply

5
Power
Figure 11 Rear View for connecting the Speed Touch Home
Connecting
STHome Start Up
28 / 180
4 2 1
DC ATMF 25 10Base T/MDI-X
The Speed Touch Home is delivered with a modular external
power adapter of 120 V
(European standard) converting to:
9V /1A unregulated output voltage for passive splitter
"
DC
versions ;
12V /1A unregulated output voltage for active splitter
"
DC
versions.
See Appendix B for connector layout and output specifications.
Proceed as follows to connect the power supply adapter :
Plug the power adapter's coaxial jack into receptacle
"
Plug the power supply adapter into the mains outlet.
"
Turn on the STHome with the power switch
"
Check the visual indicators on top of the STHome (See
"
section 2.2.2). The visual indicator marked PWR/Alarm
initially flashes red, indicating that the STHome is performing
a self test.
If the self test was successful, the PWR/Alarm" indicator
"
shows continuous green.
At this point, the STHome is ready for ADSL connectivity.
"
Defaults
/60Hz (US standard) or 230 V
AC
3
Line
adsl 0782/ 01
/50Hz
AC
4 .
.
3EC 17096 AAAA TCZZA Ed. 01