Figure 57 'Arp -A ' Command - Alcatel speed touch home Advanced User's Manual

3EC 17096 AAAA TCZZA Ed. 01
The procedure for Windows 98 is described below. Small
differences may occur for other platforms.
1. Open the DOS box from the Windows 98 taskbar.
2. In DOS, execute command:
arp –a
The result will be as shown in figure 57.
Figure 57 'Arp -a ' Command
3. Now add a static entry to the PC's ARP cache, according to
the syntax below:
arp –s <STHome IP address> 01–90–D0–80–01–01
<STHome IP address> is a placeholder for the IP address
to be assigned to the Speed Touch Home.
In the subsequent example, 10.0.0.145 will be used.
The MAC address: 01–90–D0–80–01–01 is a special MAC
group address from Alcatel on which the STHome will react.
For the example the command is thus:
arp –s 10.0.0.145 01–90–D0–80–01–01
11 Lost Speed Touch
101 / 180