7.8
Configuring and Using Tunnelling on Windows
NT Platforms
ATTENTION
7.8.1
Installing PPTP on a Windows NT Platform
3EC 17096 AAAA TCZZA Ed. 01
This section describes how to create and setup a PPTP Dial Up
connection over standard telephone lines and Virtual Private
Network connections over IP networks such as the Internet on
a Windows NT platform.
Make sure that 'Microsoft Service Pack 3' has been installed on
your PC before you start creating tunnel sessions.
Before you can start creating tunnels, the PPTP Network Protocol
must be added to your Windows NT platform.
To install the PPTP networking protocol, proceed as follows:
1. Double click
2. Double click
3. Double click
4. The 'Network' window appears (See figure 31).
7 PPP to PPTP Relaying for Windows 9x
on your desktop.
.
.
65 / 180