Your Speed Touch Home And Ip Addressing; Static Ip Configuration - Alcatel speed touch home Advanced User's Manual

9 Configuring IP
9.3

Your Speed Touch Home and IP Addressing

9.3.1

Static IP Configuration

Sample Configurations
86 / 180
The Speed Touch Home comes with a preconfigured Net10" IP
address i.e. 10.0.0.138.
To configure a User Defined" IP address, browse to the STHome
local web pages and configure an Extra" IP address on the 'Initial
Setup' web page as described in section 12.1.3
Single PC Configuration
"
In the below drawing, a simple configuration is given: one PC
attached to the Speed Touch Home. It is most applicable to
Bridging and PPP to PPTP Relaying.
IP Address : 10.0.0.138
(Sub)net Mask : 255.0.0.0
Default Gateway : none
Figure 51 A Single PC connected to your STHome.
Small Work Group Configuration
"
You can setup a local workgroup around the STHome as
shown in the below drawing. Notice that the default gateways
in the PCs point to the STHome.
IP Address : 172.16.0.2
(Sub)net Mask : 255.255.0.0
Default Gateway : 172.16.0.4
IP Address : 172.16.0.4
(Sub)net Mask : 255.255.0.0
Default Gateway : none
IP Network 172.16
Figure 52 A work group connected to your STHome.
IP Address : 10.0.0.1
(Sub)net Mask : 255.0.0.0
Default Gateway : none
IP Network 10
IP Address : 172.16.0.1
(Sub)net Mask : 255.255
Default Gateway : 172.1
IP Address : 172.16.0.3
(Sub)net Mask : 255.255
Default Gateway : none
3EC 17096 AAAA TCZZA Ed. 01
adsl 0544/ 02
adsl 0545/ 02