Table of Contents
Advertisement
CALLER ID / ANI NUMBER STORAGE
When a call is received on a caller ID (IX-8CITK, IX-8UNTK) or ANI (IX-
DTI- T/IX-DTI-P) line, the Iwatsu Enterprise-CS will capture and store in
the system memory information about the caller received with the call. This
information includes the caller's telephone number and name, date and time
of the call, trunk number, and destination station. This information can be
output as a system event code or to SMDR. Information for the 500 most
recent calls can be stored in the system memory on a first in, first out basis.
Two modes of storage are available for this feature:
Abandon Call Storage
All Call Storage
Abandon Call Storage. When Abandoned Calls Only is selected as the
storage mode for this feature, information will only be stored for the
following types of calls:
Caller hangs up or is disconnected before the call is answered.
Caller hangs up or is disconnected while on hold or during hold recall.
Caller hangs up or is disconnected during camp-on transfer or camp-on
recall.
All Call Storage. When All Call is selected as the storage mode for this
feature, the system will capture and store information about the caller
received with the 50 most recent calls on caller ID or ANI lines.
CALLER ID TRUNKS
Iwatsu Enterprise-CS will support Caller ID trunks provided by the phone
company. The IX-8CITK or IX-8UNTK card is required for caller ID
operation.
DELAYED RINGING
Allows outside lines ringing at a telephone to ring at another telephone or
group of telephones after a predetermined period of time.
SYSTEM FEATURES - 58
Advertisement
Table of Contents
