Group Night; Incoming Call Termination; Message Waiting Control - Iwatsu ENTERPRISE 5.0 Owner's Manual

GROUP NIGHT

This feature allows an attendant to activate or deactivate night mode on an
individual trunk group basis.
Operation
To access the Group Night feature through a KT+DSS:
Press GROUP NIGHT key.
Enter in trunk group # (001-250)
Enter in mode # (1= day, 2= night).
To access the Group Night feature through an attendant console:
Press ETC once.
Press F1 once to select Group Night.
Enter in the trunk group # (001-250).
Enter in mode # (1= day, 2 = night).
Press END.

INCOMING CALL TERMINATION

Outside lines may be programmed to appear individually on Float buttons or
they may be grouped together to appear on one or several Float buttons.
Operation
None

MESSAGE WAITING CONTROL

Allows you to inform an extension user that there is a message waiting for
them by lighting a Message Waiting Lamp on their phone. This operation
allows you to send a message without having the desired extension ring.
Operation
This feature is performed by using the display and the Soft Function buttons.
To get to the Message Waiting Control prompts:
Press the ETC button one time and the display will show:
GNT
F1
Press the F4 MWC button and the display will show:
***Message Wait Control***
<EXT_>
REG CLR1
F1
ATTENDANT CONSOLE USER GUIDE - 256
SSC TAC MWC SPDR
F2 F3 F4 F5
CLR2 CLR3 CLR4
F2 F3 F4 F5
F6
ALCLR
F6