Flash; Call Forwarding; Set Forward Destination - Iwatsu ENTERPRISE 5.0 Owner's Manual

FLASH

Operation
For Long Flash:
Press and release the receiver button quickly of press the Flash
key.
Dial the Long Flash code
Dial new number.
For Short Flash (Centrex or PBX use):
Press and release the receiver button quickly or press the Flash
key.
Dial the Short Flash code
Dial new number or feature code.
The Flash key can only be used when the call is connected.

CALL FORWARDING

SET FORWARD DESTINATION

Operation
Lift the receiver (handset).
Enter the Call Forward Code
Enter the Call Type you wish to forward:
1 = All calls (CO/Intercom).
2 = CO calls only.
3 = Intercom calls only.
Enter the Flexible Call Forward Mode:
1 = All calls to another extension or hunt group.
2 = Busy/No Answer calls to another extension or hunt group.
3 = No Answer calls to another extension or hunt group.
4 = All Calls forward to an external number (using Personal
Speed Dial Codes 90-99).
Do one of the following:
If you chose Mode 1,2, or 3, enter the extension or hunt
group number.
If you chose Mode 4, enter the Personal Speed Dial Code
(90-99).
Note: When the setting is valid, you will hear a confirmation tone.
If the setting is invalid, you will hear a warning tone.
Hang up.
SIP & SINGLE LINE TELEPHONE USER GUIDE - 291
.
.
.