Making An E-Response Help Call; Transferring A Call To Another Extension; Putting A Call On Hold - Iwatsu ENTERPRISE 5.0 Owner's Manual

MAKING AN E-RESPONSE HELP CALL

Operation
Lift the receiver or press [SPKR] and remain off hook on ICM
for a duration that exceeds the amount of time programmed in
the system.
Or
Lift the receiver to make an intercom call. Begin dialing.
Between digits stop dialing for more than 10 seconds.
Or
Dial the E-Response Group access number at Intercom dial
tone.
SIP – Not Supported.

TRANSFERRING A CALL TO ANOTHER EXTENSION

Operation
When speaking on an outside line:
Press and release the receiver button quickly or press the Flash
key.
Wait for the dial tone.
Dial the desired extension number.
Hang up or announce the call, then hang up.
(Polycom SIP Station)
Press the Transfer soft key.
Dial the desired extension number.
For blind transfer: Press the Blind soft key and then hang up.
For screened transfer: Press the Dial soft key, dial the
extension, announce the call and then hang up.
If the call is not answered it will return to your phone.

PUTTING A CALL ON HOLD

Operation
When speaking on an outside line:
Press the Hold button on the telephone.
Or
Press and release the receiver button quickly or press the Flash
key.
Dial the Exclusive Hold code
Hang up.
A call placed on Hold may only be picked up by the extension that
placed the call on Hold.
SIP & SINGLE LINE TELEPHONE USER GUIDE - 281