Trunk Forced Release - Iwatsu ENTERPRISE 5.0 Owner's Manual

TRUNK FORCED RELEASE

Allows you to remove an outside line from service.
Operation
This feature is performed by using the display and the Soft Function buttons.
To get to the Trunk Forced Release prompts:
Press the ETC button two times and the display will show:
LOCK SRL
F1
Press the F3 TRL button and the display will show:
***Trunk Forced Release (Trunk)***
<Trunk_>
DISP CON
F1
To release an individual outside line from service:
Dial the outside line number
will show the current status:
<TRUNK 1> Trunk idle
Press the F3 RLS button to release an outside line from service
Press the F2 CON button to put an outside line in service
Press the END button
To release an outside line group from service:
Press the F4 GRP button and the display will show:
***Trunk Forced Release (GROUP)***
<GROUP_>
F1
Dial the outside line group number
Press the F3 RLS button to release an outside line group from
service
Press the F2 CON button to put an outside line group in
service
Press the END button
ATTENDANT CONSOLE USER GUIDE - 274
TRL CRL
F2 F3 F4 F5
RLS GRP
F2 F3 F4 F5
CON RLS
F2 F3 F4 F5
F6
F6
-
and the display
F6
-