Message Waiting - Iwatsu ENTERPRISE 5.0 Owner's Manual

MESSAGE WAITING

Allows you to light a lamp at another extension to inform them that you wish
to speak with them.
Note: This feature is not supported when an MBOX key is programmed on
the telephone.
Operation
To leave a message:
When the extension you are calling is busy or does not answer:
Do not hang up
Press the Message button MSG
Dial
Wait for a confirmation tone
Hang up
The Message button MSG lamp will be solid red at the called
extension.
To answer messages:
When the Message button MSG lamp is lit at your extension:
Lift the receiver
Wait for the dial tone
Press the Message button MSG
Dial
The system will automatically call the extension which left the
message. If you have a display phone the display will indicate the
number of messages left. To view all messages before returning a
call, press the Message button MSG until the desired extension
number is displayed. Then dial
by another extension will be indicated by a solid red lamp on the
Message button. Messages left by a voice mail machine will be
indicated by a flashing red lamp on the Message button.
To display messages at your extension:
Press the Message button MSG
The display shows the extension number(s) which left you a
message and the number of messages left. If you have more than 1
message, press the Message button MSG again for the next
message to be displayed.
DIGITAL TELEPHONE USER GUIDE - 187
to return the call. Messages left