Automatic Answer Mode; Call Intercept - Iwatsu ENTERPRISE 5.0 Owner's Manual

AUTOMATIC ANSWER MODE

Allows you to direct outside calls to be answered by a prerecorded message.
There are two answering modes for this feature. For example, this feature
can be used to inform outside callers that the office is closed for the day.
This feature requires the use of the Message Card. A programming option
may be enabled to allow the ECS to automatically switch to the Automatic
Answer Mode at a certain time. You must manually switch the system to the
normal mode.
Operation
To turn Automatic Answer Mode on:
Press the Automatic Answer Mode button AUTO and the lamp
for that button will be flashing red for Mode 1 (Day Mode)
Press the Automatic Answer Mode button AUTO a second
time and the lamp for that button will be solid red for Mode 2
(Night Mode)
To turn Automatic Answer Mode off:
Press the Automatic Answer Mode button AUTO until the
lamp for that button is off

CALL INTERCEPT

This programming option allows outside calls to be directed to ring at the
Attendant Console if they go unanswered, if they are transferred to a non-
existent extension or if they reach an extension in the Do No Disturb mode.
These non-existent calls will light the lamp on the Recall button RECALL at
the Attendant Console.
Operation
None
ATTENDANT CONSOLE USER GUIDE - 251