System Announcement Recording - Iwatsu ENTERPRISE 5.0 Owner's Manual

SYSTEM ANNOUNCEMENT RECORDING

If your Iwatsu Enterprise-CS is equipped with an IX-CMSG-1 card you may
make customized recordings to be played to outside callers. The total
recording time is 330 seconds with the IX-CMSG-1 card. Message number
01 is reserved for the System Announcement recording.
Operation
This feature is performed by using the display and the Soft Function buttons.
To get to the System Announcement Recording prompts:
Press the ETC button three times and the display will show:
CLK
F1
Press the F2 VSSR button and the display will show:
Record Class
CLR
F1
To record a customized message:
Dial the message number
Make your announcement through the receiver
Dial to end the recording
Press the END button
To erase a customized message:
Press the F1 CLR button and the display will show: Clear
Class
Dial the message number
Press the END button
To listen to a customized message:
Press the F2 RPL button and the display will show:
Replay Class
ALL
F1
Dial the message number
Press the END button
ATTENDANT CONSOLE USER GUIDE - 266
VSSR
F2 F3 F4 F5
RPL
F2 F3 F4 F5
-
-
FIX
F2 F3 F4 F5
-
F6
F6
for your new message
to be erased
F6
to be played