Table of Contents
Advertisement
AUTOMATIC NUMBER IDENTIFICATION (ANI)
TRUNKS
Iwatsu Enterprise-CS will support ANI trunks provided by the telephone
company on T1, ISDN PRI, and ISDN BRI lines. The IX-DTI-T card is
required for T1 lines, the IX-DTI-P is required for ISDN PRI lines, and the
IX-4ICOTB is required for ISDN BRI lines.
AUTOMATIC OUTSIDE LINE RELEASE
Outside lines which are in a hold or trunk-to-trunk conference status are
automatically disconnected when the outside party hangs up. The optional
IX-4ETRAN card monitors the voice/tone signals from the outside line to
determine if the call is terminated when a remote disconnect signal is not
provided.
BACKGROUND MUSIC
If your Iwatsu Enterprise-CS is connected to an external music source, the
music played may be heard through the speaker in any Iwatsu telephone
connected to the system. This same music source may be played through an
external paging system when the optional IX-EDVIF or IX-MISC/IX-
MCAA card is installed.
BLUETOOTH
The optional IX-58BTINF Bluetooth Interface module allows a Bluetooth
headset to be used with the IX-5810 Digital Telephone. This is a Class 2
version 2.0 + EDR Bluetooth module that attaches to the IX-5810 circuit
board and can be installed by your Iwatsu Authorized installer. The optional
Bluetooth Interface Module (IX-58BTINF) allows you to connect a
Bluetooth headset to an IX-5810 Digital Key Telephone. Please consult with
your authorized distributor for Bluetooth headset requirements.
CALL FORWARDING
Fixed Call Forwarding
Allows your Iwatsu Enterprise-CS installer to predefine call forwarding
patterns for extensions. Fixed Call Forwarding does not activate the lamp on
the Call Forward button [FWD] and calls will always forward in the
programmed sequence. Fixed Call Forwarding may be overridden by Call
Forwarding entered at your telephone. All three forwarding modes may be
programmed for Fixed Call Forwarding.
SYSTEM FEATURES - 56
Advertisement
Table of Contents
