Night Mode; Operator Priority - Iwatsu ENTERPRISE 5.0 Owner's Manual

To turn Message Waiting On:
Dial the desired extension number
Press the F1 REG button to leave a message
Press the button Release button END
To cancel Message Waiting:
Press the F2 CLR1 button to clear the first message left
Press the F3 CLR2 button to clear the second message left
Press the F4 CLR3 button to clear the third message left
Press the F5 CLR4 button to clear the fourth message left
Press the F6 ALCLR button to clear all the messages left
Press the Release button END

NIGHT MODE

Allows you to change the ringing termination point for outside lines. This
alternate point might be a loud bell, a phone or a group of phones. A
programming option may be enabled to allow the ECS to automatically
switch to the Night Mode at a certain time; however, you must manually
switch the system back to the normal mode.
Operation
To place the system in Night Mode operation:
Press the Night Mode button NIGHT and the lamp for that
button will be solid red
Press the Release button RLS
To place the system in Day Mode operation:
Press the Night Mode button NIGHT and the lamp for that
button will be off
Press the Release button RLS

OPERATOR PRIORITY

The system operator has the ability to override any ringing or voice announce
intercom call or paging call. This occurs when calls are made simultaneously,
or another party other than the operator makes the call first.
ATTENDANT CONSOLE USER GUIDE - 257