Call Divert; Call Forwarding - Flexible Call Forwarding; Set Forward Destination - Iwatsu ENTERPRISE 5.0 Owner's Manual

CALL DIVERT

A station user can divert an incoming ringing call by pressing the MBOX
key to activate the Call Forward No Answer process. The Fixed Call
Forwarding Destination must be programmed in the ECS database under
Stations > Call Forward (Class 10.78).
CALL FORWARDING - FLEXIBLE CALL
FORWARDING
Allows you to send your calls to an internal destination or external line
(using Personal Speed Dial numbers 90-99). You can also separate call
forward destinations for ICM incoming and CO incoming calls. For
instance, you could set all intercom calls to go to your cell phone, and all CO
calls to be forwarded to your voice mail.

SET FORWARD DESTINATION

Operation
Lift the receiver (handset) or press SPKR
Press FWD
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
Enter the Flexible Call Forward Mode
1 = All calls to another extension or hunt group
2 = Busy/No Answer calls to another extension or hunt group
3 = No Answer calls to another extension or hunt group
4 = All Calls forward to an external number (using Personal
Speed Dial Codes 90-99)
Do one of the following
If you chose Mode 1,2, or 3, enter the extension or hunt
group number
If you chose Mode 4, enter the Personal Speed Dial Code
(90-99)
Wait for a confirmation tone
Hang up
DIGITAL TELEPHONE USER GUIDE - 166