Caller Id, Ani Information Storage - Iwatsu ENTERPRISE 5.0 Owner's Manual

CALLER ID, ANI INFORMATION STORAGE

Allows you to store and display the telephone number for a call on a caller
ID, ANI or DNIS line. The system may be programmed to save information
for all calls, or abandoned calls only.
Operation
To view stored call information:
For station: At ICM dial tone press the illuminated USAS key
once to display information about the first call to your station.
Press to scroll forward and
sequence.
For trunk group: At ICM dial tone press the illuminated
USAT key once or the USAT key + trunk group number to
display information about the first call on a specific trunk
group. Press
sequence.
To make a call by automatically dialing the stored Caller ID or ANI
number:
With a call record displayed, Do one of the following:
For station: Press the USAS key a second time, or press FLT,
OPT, or COL
For trunk group: Press the USAT + trunk group number or
USAT key a second time, or press FLT, OPT, or COL
To add digits to the displayed number before calling out:
With a call record displayed,
Dial the additional digits to be added to the outgoing number
(the added digits do not appear on the display when entered),
then
Do one of the following:
For station: Press the USAS key a second time, or press FLT
or COL
For trunk group: Press the USAT + trunk group number or
USAT key a second time, or press FLT or COL
Press USAT, USAT
To delete saved call information from system memory:
With a call record displayed, press the UST key
DIGITAL TELEPHONE USER GUIDE - 172
to scroll backward in
to scroll forward and to scroll backward in