●
Depending on the MEAP application, you need to restart the machine. Follow the on-screen
instructions and restart the machine.
Configuring the MEAP application's authentication information
Depending on the MEAP application, you may need to configure authentication information.
1
Click [MEAP Application Management]
2
Click [Authentication Information Settings].
3
Enter the user name and password and select the login destination.
4
Click [Update].
➠
The [Authentication information has been set. Department ID: <ID>] message is displayed.
To cancel authentication information
●
Click [Delete]
Appendix
click an application to set the authentication information.
[Yes] on the authentication information page in step 3.
1079