Flash Memory Console Commands - Cisco 12404 Installation And Configuration Manual

Chapter 3 Installing the Cisco 12404 Internet Router

Flash Memory Console Commands

OL-11636-01
To determine whether the present working device you are accessing is the onboard
Flash SIMM on the RP or a PCMCIA Flash memory card in a slot on the RP, enter
the pwd command at the privileged EXEC mode prompt on the system console,
as follows:
Filo# pwd
slot0:
Filo#
In this example, the present working device you are accessing is on a PCMCIA
Flash memory card inserted in slot 0 of the RP.
To change from one type of Flash memory device access to another, enter the
cd device-name command, where device-name can be slot0:, slot1:, or
bootflash:.
Sample uses of the change dir command include:
Filo# cd slot1:
Filo# pwd
slot1:/
Filo# cd slot0:
Filo# pwd
slot0:/
Filo# cd bootflash:
Filo# pwd
bootflash:/
Filo#
To list the directory contents of the Flash memory media in use, enter the
dir [device-name] command at the privileged EXEC mode prompt, where
device-name can be slot0:, slot1:, or bootflash:.
A sample use of the dir command follows.
Filo# dir
Directory of slot0:/
1 -rw- 122015
2 -rw- 2054979
3 -rw- 6670560
4 -rw- 5560
20578304 bytes total (9661756 bytes free)
Filo#
Cisco 12404 Internet Router Installation and Configuration Guide
Sep 30 2002 15:03:55 myfile1
Sep 30 2002 15:17:33 gsr-diag-mz.RELEASE28
Sep 30 2002 15:22:49 gsr-p-mz.p7
Oct 08 2002 16:54:53 fun1
Using Flash Memory Cards in the RP
3-74