Cisco 12404 Installation And Configuration Manual page 210

Removing and Replacing an AC Power Entry Module
Connect the power cord into the receptacle and place the bail latch over the power
Step 9
cord to secure it in place.
Plug the power cord into its AC outlet.
Step 10
Power on the circuit breaker assigned to that AC outlet.
Step 11
Power on the PEM.
Step 12
•
•
See the
PEM does not power on correctly.
Cisco 12404 Internet Router Installation and Configuration Guide
5-12
The green INPUT OK and OUTPUT OK LEDs are on.
The amber OUTPUT FAIL LED is off.
"Troubleshooting an AC PEM Installation" section on page 5-13
Chapter 5 Maintaining the Cisco 12404 Internet Router
if the
OL-11636-01