Line Cards - Cisco 12404 Installation And Configuration Manual

Appendix A Technical Specifications
Ethernet Port
Note

Line Cards

Note
OL-11636-01
The PRP includes two Ethernet ports, both using an 8-pin RJ-45 receptacle for
either IEEE 802.3 10BASE-T (10 Mbps) or IEEE 802.3u 100BASE-TX
(100 Mbps) connections.
The transmission speed of the Ethernet ports is auto-sensing by default and is user
configurable.
The Cisco 12404 router is shipped with up to 3 installed line cards that provide a
variety of network media types (based on the order). The line cards can be
installed in slots 0 through 3 in the line card cage and interface to each other and
to the RP through the CSF
attach to each line card to manage and organize the network interface cables.
Slot 0 (zero) is one slot above the slot labeled Fabric Alarm.
Figure A-4 RP and Line Card Slot Numbers and CSF Location
3
2
1
0
Fabric Alarm
Cisco 12404 Internet Router Installation and Configuration Guide
(Figure A-4). Horizontal cable-management brackets
Product Architecture
A-19