Preparing For Installation; Tools And Equipment; Safety And Compliance; Chapter 2 Preparing For Installation - Cisco 12404 Installation And Configuration Manual

Tools and Equipment

Tools and Equipment

Safety and Compliance

Cisco 12404 Internet Router Installation and Configuration Guide
2-2
The Cisco 12404 Internet router is designed to be installed with a minimum
number of tools. The following tools are required.
1/4–inch flat-blade screwdriver
•
3/16–inch flat-blade screwdriver
•
9/16–inch wrench
•
10-mm wrench (either open-end or socket)
•
• 2-mm allen wrench
ESD-preventive wrist or ankle strap
•
Antistatic mat
•
Tape measure
•
Wire cutters
•
Pliers
•
The following guidelines will help to ensure your safety and protect the
equipment. This list is not inclusive of all potentially hazardous situations, so be
alert.
• General Safety Guidelines, page 2-3
Preventing Electrostatic Discharge Damage, page 2-4
•
Laser Safety, page 2-6
•
Laser Safety, page 2-6
•
Lifting Guidelines, page 2-6
•
Chapter 2

Preparing for Installation

OL-11636-01