Cisco Ios Software Configuration For The Cisco 12404 Internet Router - Cisco 12404 Installation And Configuration Manual

Cisco IOS Software Configuration for the Cisco 12404 Internet Router

Cisco IOS Software Configuration for the Cisco 12404
Internet Router
Cisco 12404 Internet Router Installation and Configuration Guide
3-39
If the power assembly does not power up, or if the system or any interfaces do not
initialize properly, see
still unable to resolve the problem, contact your Cisco service representative for
assistance.
This section provides you with the necessary information to configure your
system so that it can access the network or enable other hosts in the network to
access your system remotely by means of a Telnet connection.
The system startup process and a procedure for performing a basic configuration
of your Cisco 12404 Internet router are presented in the following sections.
Cisco IOS Software Images, page 3-40
•
Conditions to Check before System Startup, page 3-40
•
Boot Process Overview, page 3-41
•
Starting the Router and Observing Initial Conditions, page 3-42
•
Manually Booting the System, page 3-49
•
Configuring the Router, page 3-52
•
Using Flash Memory Cards in the RP, page 3-70
•
Chapter 3
Chapter 4, "Troubleshooting the
Installing the Cisco 12404 Internet Router
Installation,". If you are
OL-11636-01