Stop Showing Content From A Computer Connected To The Realpresence Touch; Show Content Using The Realpresence Touch; Audio Adjustments; Mute The Microphone - Polycom RealPresence Group 300 User Manual

Stop Showing Content From a Computer Connected to the
RealPresence Touch
After sharing content from a connected computer, you can choose to stop showing content on the RealPres-
ence Touch.
To stop showing content from a computer connected to the RealPresence Touch:
» On the RealPresence Touch, under People+Content IP, tap
The content from the connected computer is no longer showing.

Show Content Using the RealPresence Touch

To show on content, you can use the RealPresence Touch to launch the VisualBoard application on the
paired room system.
The content displays on the room system monitor, where you can make annotations on the content.
To show content using the VisualBoard Application:
1 To show content using the VisualBoard application, do one of the following:
 In a Call: On the RealPresence Touch, from any screen, tap
Content.
 Out of a Call: On the RealPresence Touch, from the Home screen, tap
2 Under VisualBoard, tap Show Content.
The VisualBoard application displays on the paired room system monitor. For information on using
the VisualBoard application to annotate content, refer to Polycom
Application with Polycom

Audio Adjustments

You can control several audio settings on your RealPresence Group system and control devices. However,
it is important that you do not move the microphones as this might detract from the audio quality.

Mute the Microphone

You can mute your microphone and listen to the far-end call audio using the RealPresence Touch.
To mute your microphone:
1 From the Home screen, tap the
The Control Bar icons display.
2 Tap Mute to mute the microphone.
Polycom, Inc.
® ®
RealPresence Group Series User Guide.
Control bar at the bottom of the RealPresence Touch screen.
Stop Content.
Menu, Active Call, and then
Show Content.
®
VisualBoard™ Technology
59