Install People+Content Ip; Show Content With People+Content Ip; Stop Showing Content With People+Content Ip - Polycom RealPresence Group 300 User Manual

Note: Showing content recommendations
For a computer connected directly to the RealPresence Group system, Polycom recommends using
the Send Computer button or Content button instead of People+Content IP.

Install People+Content IP

You must install the People+Content IP application on a computer before you can use it to show content.
To install People+Content IP on a computer:
1 On a computer, go to http://www.polycom.com.
In the Search box, type PPCIP application download.
2 Download and install the People+Content IP software.

Show Content with People+Content IP

After you install People+Content IP, you are ready to share content.
Note: Multiple windows and People+Content IP
If you are using multiple windows on your computer, move the People+Content IP icon to the window you
want to share.
To start showing content:
1 On your computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the RealPresence Group system and the meeting password, if
one is set.
You can find your IP address by pressing the
3 On the computer, click Connect.
4 In People+Content IP, open the content you want to show, and click

Stop Showing Content with People+Content IP

When you are done showing content, you must shut down People+Content IP.
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking the icon in the task bar.
2 Click in People+Content IP.
Polycom, Inc.
on the remote control.
.
24