Switch Between Full-Screen Video And The Home Screen; Select Cameras With The Remote Control; Switch Between Cameras With The Remote Control; Adjust Cameras With The Remote Control - Polycom RealPresence Group 300 User Manual

With realpresence touch
Hide thumbs Also See for RealPresence Group 300:
Table of Contents

Advertisement

Switch Between Full-Screen Video and the Home Screen

When your call connects, the system automatically shows video on the whole screen.
You can switch back to the Home screen during a call if, for example, you need to adjust a user setting and
your system is configured to allow you to do so.
To switch between the Home screen and full screen:
1 Press
on the remote control to go to the Home screen.
2 Press
on the remote control to see the full screen.

Select Cameras with the Remote Control

You can use the remote control to select and adjust the main camera or other near-end or far-end video
sources.
You might be able to adjust other auxiliary cameras or far-end cameras that support pan, tilt, and zoom
movement. You can adjust the far-end camera only if it is configured at the far end to allow you to control it.
When you are in camera control mode, you can press and hold a number to save a preset.
To select a near-end or far-end camera, do one of the following:
1 If you are not in a call, go to
Select the camera or other video source you want to use. If a single camera is connected to your
system, Select Camera displays what the attached camera sees.
If you are in a call, select
Then select Near Cameras for near-end control or Far Cameras for far-end control.

Switch Between Cameras with the Remote Control

You can switch to controlling the far-end camera or the near-end camera.
» To switch between Near Cameras and Far Cameras without accessing the menu, press Select on
the remote control while in a call.

Adjust Cameras with the Remote Control

After you select a camera, you can make some adjustments to enhance the view.
Note: Turn camera tracking off before adjustments
Before you can adjust the EagleEye Director camera, you must turn camera tracking off.
Polycom, Inc.
> Cameras > Select Camera.
> Cameras.
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Realpresence group 500Realpresence group 700

Table of Contents