Configure Automatic Self View Control With The Remote Control; Use The Remote Control To Allow Video Display On The Web; Video And User Interface Adjustments - Polycom RealPresence Group 300 User Manual

Note: Backlight control display
Because backlight controls adjust the main built-in camera, these controls do not make content displayed
from a computer appear brighter.
To turn backlight compensation on:
» From the Home screen, select
enable the setting.
Configure Automatic Self View Control with the
Remote Control
If your administrator has allowed user access to the Automatic Self View Control, you can configure this
setting so that users can display or hide the Self View window.
To enable or disable the Automatic Self View Control:
1 From the Home screen, select
2 Select the Automatic Self View Control checkbox.
Use the Remote Control to Allow Video Display on the
Web
If your system administrator has allowed access to user settings, you can choose whether to allow viewing
of the room where the system is located or video of calls in which the system participates.
Caution: Default setting does not allow video display
The default setting is to not allow video display on the web. Be sure to verify whether your system adminis-
trator wants the setting to be changed.
To allow the display of video on the web:
1 Navigate to
2 Select Allow Video Display on Web.

Video and User Interface Adjustments

Besides managing audio and call settings, you can also manage the video and certain user interface
settings.
Polycom, Inc.
> User Settings > Camera > Backlight Compensation and
> User Settings > Camera.
> User Settings > Meetings.
34