Show Content From A Computer Connected To The Realpresence Touch - Polycom RealPresence Group 300 User Manual

Figure 2: Connections for a RealPresence Group 700 system
Show Content From a Computer Connected to the RealPresence
Touch
After you connect a USB cable from your computer to the RealPresence Touch, you can share content from
the computer to the RealPresence Group system monitor display.
The computer does not need a LAN connection for this feature, because content information is sent over
the USB cable connected to the RealPresence Touch. Windows and Macintosh computers are supported.
Content audio is not supported.
To show content from a computer connected to the RealPresence Touch:
1 Connect a compatible USB cable from the RealPresence Touch to your computer.
2 After the USB cable is connected, the People+Content (PPCIP) application is available on one of
your computer drives, such as E or F.
3 Open the People+ContentIP.exe file to start the application.
4 When you are ready to begin showing content, do one of the following:
Out of a Call: On the RealPresence Touch, from the Home screen, tap
under People+Content IP, tap Show Content.
In a Call: On the RealPresence Touch, from any screen, tap
under People+Content IP, tap Show Content.
Content on your computer is now displaying on the connected room system monitor.
Polycom, Inc.
Show Content. Then
Menu, Active Call, Content. Then
58