Call A Speed Dial Entry; Answer A Call; Ignore A Call; Hold A Call - Polycom RealPresence Group 300 User Manual

Call a Speed Dial Entry

If your system administrator enabled Speed Dial, you can use your remote to quickly call a contact in your
directory.
To call a speed dial entry:
1 At the top of the Home screen, select the Speed Dial tab and select a Speed Dial entry to call.
2 To place the call, select Call or to use your remote control, select

Answer a Call

The way a RealPresence Group system handles incoming calls depends on how the system is configured.
It either answers the call automatically, rejects the call automatically, or prompts you to answer the call
manually.
If the Polycom RealPresence Group system is not configured to answer incoming calls automatically, you
are prompted to answer manually.
To answer a call manually:
» Using your remote control, select Answer or press

Ignore a Call

If the Polycom RealPresence Group system does not answer incoming calls automatically, you are
prompted to answer manually.
To ignore an incoming call:
» Using your remote control, select Ignore or press

Hold a Call

In a point-to-point call, you can place a call on hold, and then answer an incoming call, make an outgoing
call, or switch between two calls.
After you complete a call, you can resume the call you had on hold.
To place a point-to-point call on hold:
1 Press Menu on the remote control, then select Active Call > Hold.
When a call is on hold, On Hold appears on the RealPresence Group system screen for 5 seconds.
After 5 seconds, the Hold icon
resumed.
Polycom, Inc.
.
.
appears and remains on the screen until all calls disconnect or are
.
13