Use The Remote Control To Record On The Realpresence Media Suite; Use Far End Controls To Record On The Realpresence Media Suite - Polycom RealPresence Group 300 User Manual

The supported DTMF codes for activating the button controls on the TVUI are listed in the next table.The
far end controls are presets that correspond to the button controls on the TVUI. You activate these controls
by using the selection buttons (Left, Up, and Right) on the remote control.
TVUI State
Menu display state
Video playback state

Use the Remote Control to Record on the RealPresence Media Suite

To activate TVUI button controls using a remote control:
1 To dial the Media Suite, press
2 In the dialing field, enter the number of the RealPresence Media Suite you want to call as follows:
 Numbers: To enter numbers, select each number on the keypad with the remote control or enter
numbers on your remote control.
 Letters: To enter letters, select Keyboard. Then use your remote control to select each letter on
the on-screen keyboard. Or you can use the text-entry method commonly used with cell phones
to select letters directly on your remote control.
 Backspace: To delete a number or letter, press
3 If the recording does not start immediately, press *2 on the remote control to start the recording.
4 When you are done recording, press *3 on the remote control.
5 To playback the recording, press *5 on the remote control.

Use Far End Controls to Record on the RealPresence Media Suite

To activate TVUI far end controls using a remote control:
1 Point the remote control toward the RealPresence Group system.
2 Using the remote control, press the appropriate selection button (Left, Up, or Right) that
corresponds to the far end control shown on the TVUI (Record Start/Stop, Confirm/Pause, or Play)
that you want to activate.
Polycom, Inc.
Operation
Pause recording
Start a recording
Resume a paused recording
Stop a recording
Playback a recording
Pause the video
Start the video
Resume a paused video
Stop a playback and return to the main menu
Reverse a video
Fast forward a video
on your remote or navigate to
DTMF Code
*1
*2
*3
*5
*1
*2
*3
*4
*6
.
on the remote control.
31