To enable EagleEye Director tracking in a call:
» Use the remote to select
The Mute and Unmute tracking functions on the microphone and remote now work.
Disable EagleEye Director Tracking in a Call
While in a call, you might want to disable EagleEye Director tracking.
When you stop camera tracking through the menu, the Mute and Unmute buttons do not affect tracking.
To disable EagleEye Director tracking in a call:
» Use the remote control to select
After you disable tracking in this way, the Mute and Unmute functions on the microphone and remote
control no longer affect tracking.
Camera Presets
Camera presets are stored camera positions that you can create ahead of time or during a call.
The system uses preset 0 as the default camera position for all preset camera positions. This default
camera position is zoomed out, panned straight ahead with horizontal tilt.
Presets allow you to do the following:
● Quickly point a camera at pre-defined locations in a room.
● Select a video source such as a document camera or an auxiliary camera.
If your system camera supports pan, tilt, and zoom movement, you can create up to 10 preset camera
positions for the near-end camera. Each preset stores the following information:
● Camera number
● Camera zoom level
● Direction the camera points
These presets remain in effect until you change them.
If far-end camera control is allowed, you can create 10 presets for the far-end camera. These presets are
saved only for the duration of the call. You might also be able to use presets that were created at the far end
to control the far-end camera.
Keep the following camera control information in mind when using Self Layout:
● When in a call, selecting near camera control pans and zooms the local camera without changing the
layout.
● When out of a call, selecting camera control changes the Self View to full screen.
● Incoming calls override the full-screen Self View layout.
Polycom, Inc.
> Cameras > Start Camera Tracking.
> Cameras > Stop Camera Tracking.
37