Show Content With People+Content Ip; Stop Showing Content With People+Content Ip; Show Content From A Computer Connected To Realpresence Group System - Polycom realpresence group series User Manual

Show Content with People+Content IP

After you install People+Content IP, you are ready to share content.
To start showing content:
1 On your computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the RealPresence Group system and the meeting password, if
one is set.
To view the IP address of the RealPresence Group system using the remote, select
System Detail.
3 On the computer, click Connect.
4 In People+Content IP, open the content you want to show, and click
User Tip: Multiple windows and People+Content IP
If you are using multiple windows on your computer, move the People+Content IP icon to the window
you want to share.

Stop Showing Content with People+Content IP

When you are done showing content, you must shut down People+Content IP.
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking the icon in the task bar.
2 Click in People+Content IP.
3 Click Disconnect.
Show Content from a Computer Connected to RealPresence Group
System
Before you show content, check that the computer video output is configured to use one of these supported
resolutions and refresh rates. For best video quality, use refresh rates of 60 Hz or less.
Resolution
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
1600 x 1200
1680 x 1050
Polycom, Inc.
Refresh rates (Hz)
56, 60, 72, 75, 85
60, 70, 75, 85
50, 60
60
60, 75
60
60
>
.
>
27