Switching Between Full Screen Video And The Home Screen - Polycom V500 System Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Switching Between Full Screen Video and the Home Screen

8
V500 S
YSTEM
To adjust the camera:
1. Adjust the camera by moving the camera up, down, to the left, or to
the right:
2. Focus the camera by turning the focus wheel:
Before the call connects, you see the near video in a small window on the
Place a Call (home) screen. When the call connects, the system automatically
shows the video in the whole screen. You can switch back to the Place a Call
screen during a call, for example, if you need to adjust a user setting, and
your system is configured to allow you to do so.
To learn about adjusting user settings, see Customizing Your Workspace on page 19.
To see the video in the full screen:
>>
Press Near on the remote control.
To see the Place a Call screen:
>>
Press Home on the remote control.
. . /
WWW POLYCOM COM VIDEODOCUMENTATION