Psu - Ricoh B064 SERIES Service Manual

REPLACEMENT AND ADJUSTMENT

3.12 PSU

[B]
1. Open the front door. (
2. Pull the Z-fold mechanism out of the unit. (
3. Remove the left cover and right cover. (
4. Remove the base top cover [A] ( x 3).
5. Remove the base left cover [B] ( x 2).
6. Remove the base right cover [C] ( x 2).
7. Make a mark at the positions of the connectors, then disconnect them.
NOTE: These connectors do not have different colors. To help you connect
them again correctly, make marks on them.
8. Remove the screws of the power supply unit (PSU) [D] ( x 4).
9. Pull the power supply unit [D] out of the right side of the bottom.
10. Remove the power supply board [E] ( x 4,  x 5).
B660
CÓPIA NÃO CONTROLADA
[A]
[D]
3.2)
14
CÓPIA NÃO CONTROLADA
3.2)
3.2)
[E]
[C]
B660R112.WMF
SM