Starter System And Side-Stand/Ignition Interlock System - Suzuki FL125S Service Manual

STARTER SYSTEM AND SIDE-STAND/IGNITION INTERLOCK SYSTEM

R/W R/W R/W
Starter
motor
Y/G Y/G
Starter
relay
Neutral
TROUBLESHOOTING
Make sure that the fuse are not blown and the battery is fully-charged before diagnosing.
Starter motor will not run.
Step 1
1) Shift the transmission to neutral position.
2) Grasp the front brake lever, turn on the ignition switch and listen for a click from the starter relay when the
starter button is pushed.
Is a click sound heard?
YES Go to Step 2.
NO Go to Step 3.
Step 2
1) Check if the starter motor runs when its terminal is connected to the battery + terminal. (Do not use thin
"wire" because a large amount of current flows.)
Does the starter motor run?
YES • Faulty starter relay.
• Loose or disconnected starter motor lead wire.
• Loose or disconnected between starter relay and battery + terminal.
NO Faulty starter motor.
R R
Starter
button
W/B W/B
Side-stand Side-stand
relay diode
Gr Gr
Y/B Y/B
Gear position
switch (N)
Bl Bl
diode
Front brake
switch
Side-stand
switch
G G B/W B/W
B/W B/W
FL125SDW
Ignition
switch
O O
R/W R/W
Battery
cut off
Fuse
relay
(15A)
R R
Y/G Y/G
B/W B/W
To ECM
8-92
Battery