Starter System (For Fl125Sd); Troubleshooting (For Fl125Sd) - Suzuki FL125S Service Manual

6-12 ELECTRICAL SYSTEM

STARTER SYSTEM (For FL125SD)

R
R R
Battery

TROUBLESHOOTING (For FL125SD)

NOTE:
* Make sure that the fuse is not blown and the battery is fully-charged before diagnosing.
Starter motor will not run.
Step 1
1) Disconnect the starter motor lead wire.
2) Turn the ignition switch to the "ON" position.
3) Listen for a click sound from the starter relay when the starter button is pushed.
Is a click sound heard?
YES Go to Step 2.
NO Go to Step 3.
Step 2
1) Check if the starter motor runs when its terminal is connected to the battery + terminal. (Do not use thin
"wire" because a large amount of current flows.)
Does the starter motor run?
• Faulty starter relay.
YES • Loose or disconnected starter motor lead wire.
• Loose or disconnected between starter relay and battery + terminal.
NO Faulty starter motor.
R R
Ignition
switch
Main fuse
R O
Starter
button
Y/G Y/G
Starter
relay
R/W R/W
Starter
motor
B/W B/W