• Connect the throttle pulling cable 4 and throttle returning
cable 5 to the throttle cable drum.
• Tighten each lock-nut.
• Adjust the throttle cable play. (!8-8)
• Route the harness and fuel hoses properly.
(!8-107 and 111)
FUEL INJECTOR
REMOVAL
"
* Drain out fuel before removing the fuel injector.
* Do not drain fuel while engine is hot.
#
Gasoline is highly flammable and explosive.
Keep heat, spark and flame away.
• Remove the right leg shield. (!5-6)
• Disconnect the fuel injector coupler 1.
• Place a rag under the fuel injector and disconnect the fuel
hoses, 2 and 3.
• Remove the holder 4, spacers 5, 6 and fuel injector 7.
"
* Ensure that the fuel injector is not exposed to dust,
etc.
* Be careful not to expose the fuel injector to exces-
sive shock.
FL125SDW
8-86