Caliper Reassembly - Suzuki FL125S Service Manual

CALIPER REASSEMBLY

Reassemble the brake caliper in the reverse order of disassem-
bly. Pay attention to the following points:
Clean the caliper bores and pistons with the specified brake
fluid.
Thoroughly wash the dust seal grooves and piston seal grooves.
#
* Clean the caliper components with fresh brake fluid
before reassembly. Never use cleaning solvent or
gasoline to clean them.
* Do not wipe the brake fluid off after cleaning the
components.
* When cleaning the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvent such as gasoline, kerosine or oth-
ers.
* Replace the piston seals and dust seals with new
ones during reassembly. Apply the brake fluid to
both seals when installing them.
' Specification and classification: DOT 4
• Apply SUZUKI SILICONE GREASE to the piston seals.
/ 99000-25100: SUZUKI SILICONE GREASE
• Install the piston seals and dust seals as shown.
#
Never reuse the piston seals to prevent brake fluid
leakage.
• Apply SUZUKI SILICON GREASE to the brake caliper holder
pins.
/ 99000-25100: SUZUKI SILICONE GREASE
CHASSIS 5-20