6-28
ELECTRICAL SYSTEM
RELAYS
TURN SIGNAL RELAY INSPECTION
• Remove the frame head cover. ($5-4)
1: Turn signal relay
Before removing the turn signal relay, check the operation of the
turn signal light.
If the turn signal light does not illuminate, inspect the bulb, turn
signal switch and circuit connection.
If the bulb, turn signal switch and circuit connection are OK, the
turn signal relay may be faulty. In this case, replace the turn sig-
nal relay with a new one.
NOTE:
Make sure that the battery is fully charged.
STARTER RELAY INSPECTION
$6-19