Starter Motor Removal (For Fl125Sd) - Suzuki FL125S Service Manual

Step 3
1) Measure the starter relay voltage at the starter relay couplers (between Y/G + and B/W -) when the
starter button is pushed.
Is the voltage OK?
YES Go to Step 4.
• Faulty starter button.
• Faulty ignition switch.
NO
• Poor contact of couplers.
• Open circuit in wire harness.
Step 4
1) Check the starter relay. ($6-19)
Is the starter relay OK?
YES Poor contact of the starter relay.
NO Faulty starter relay.
Starter motor runs but does not crank the engine.
Step 1
1) Check the starter clutch.
Is the starter clutch OK?
YES Faulty starter motor.
NO Faulty starter clutch.

STARTER MOTOR REMOVAL (For FL125SD)

• Disconnect the battery - lead wire.
• Disconnect the starter motor lead wire 1.
• Remove the starter motor 2.
ELECTRICAL SYSTEM 6-13