• Install the snap ring 2.
#
The removed snap ring must be replaced with a new
one.
• Install the oil seal 3 with the special tool.
& 09913-70210: Bearing installer set
#
The removed oil seal must be replaced with a new one
to prevent oil leakage.
• Apply SUZUKI SUPER GREASE "A" to the lip of the oil seal.
* 99000-25010: SUZUKI SUPER GREASE "A"
• Install the O-ring 4 to the release arm 5.
#
The removed O-ring must be replaced with a new one
to prevent oil leakage.
• Install the release arm 5 to the clutch cover.
• Tighten the clutch adjustment lock-nut 6 to the specified
torque.
" Clutch adjustment lock-nut: 13 N·m (1.3 kgf-m)
KICK STARTER
DISASSEMBLY
• Remove the washer 1.
• Remove the kick starter drive gear 2.
ENGINE
/ /
3-52