STARTER SYSTEM AND SIDE-STAND/IGNITION INTERLOCK SYSTEM
STARTER SYSTEM DESCRIPTION
The start er system consists of the following components: the start er motor, starter relay, clutch lever
position s witch, side-stand relay, side-stand s witch, neutral switch, starter button, engine stop switch,
ignition switch and battery. Pressing the starter button (on the right handlebar switch) energizes the starter
relay, causing the contact points to close, thus completing the circuit from the starter motor to the battery.
The starter motor draws about 80 amperes to start the engine.
Starter
motor
SIDE-STAND/IGNITION INTERLOCK SYSTEM DESCRIPTION
This side-stand/ignition interlock system prevents the motorcycle from being started with the side-
stand down. The system is operated by an electric circuit provided between the battery and ignition
coil.
Fuse
Battery
Clutch lever
position switch
Starter
relay
Ignition sw itch
WIRE COLOR
G : Green
0/B : Orange w ith Black tracer
O/W: Orange w ith White tracer
R : Red
Bl : Blue
O/Y : Orange with Yellow tracer
O : Orange
Bl/B: Blue w ith Black tracer
Engine stop
switch
Starter
Side-stand
button
relay
Side-stand relay
Neutral
indicator
light
ELECTRICAL SYSTEM 6-10
Ignition
switch
Fuse
Neutral
switch
Side-stand
switch
Engine stop
switch
To ignitor
and ignition
coil
Side-stand
Neutral
switch
switch